Daily maintenance of CNC lathes

1.Clean and lubricate each guide surface every day. Machine tools with automatic lubrication systems should regularly check and clean the automatic lubrication system, check the oil volume, add lubricating oil in time, and check whether the oil pump starts and stops regularly.

Check whether the automatic lubrication system of the spindle box is working properly every day, and replace the spindle box lubricating oil regularly.

2.Pay attention to check whether the cooling fan in the electrical cabinet is working properly, whether the air duct filter is blocked, and clean the attached dust.

Pay attention to check the cooling system, check the liquid level, add oil or water in time, and replace and clean the oil and water when they are dirty.

3.Pay attention to check the spindle drive belt and adjust the tightness.

4.Pay attention to check the tightness of the guide rail insert and adjust the gap.

5.Pay attention to check whether the oil tank and oil pump of the machine tool hydraulic system have abnormal noise, whether the working oil level is appropriate, whether the pressure gauge indicates normal, and whether there is leakage in the pipeline and joints.

6.Pay attention to check whether the guide rails and machine tool protective covers are complete and effective.

7.Pay attention to check the mechanical accuracy of each moving part to reduce shape and position deviation.

8.Clean the machine tool after get off work every day, clean the iron filings, wipe the coolant on the guide rails to prevent the guide rails from rusting.