Do you know the requirements of welding robots for welding wire?

Do you know the requirements of welding robots for welding wire? The angle between the welding wire and the wood can be adjusted in the program, adjust the angle of the welding torch and the posture of the robot arm, and adjust it to the angle you want.

The welding robot can choose barrel or coil welding wire according to the needs. In order to reduce the frequency of replacing welding wire, the robot should use barreled welding wire. However, due to the use of barreled welding wire, the wire feeding hose is very long and has high resistance, which requires high quality requirements such as the stiffness of the welding wire.

When the welding wire with poor copper plating quality is used, the copper plating on the surface of the welding wire will fall off due to friction, which will cause the internal volume of the catheter to decrease, and the resistance will increase when the wire is fed at high speed. seam quality. In severe cases, the phenomenon of jamming occurs, which makes the robot stop, so the welding wire guide should be cleaned in time.

If you want to know more about the wire feeding methods of welding robots, please check here to learn more: https://www.szghtech.com/info/how-many-wire-feeding-methods-are-there-for-we-77702830.html