Maintenance Method Of Four-Axis Manipulator Of Palletizing Robot

Correct installation of the manipulator:
The first is the correct installation of the manipulator of the CNC machine tool. People should also pay more attention to the installation of the manipulator of the CNC machine tool. It is necessary to ensure that the installation of each component is in place. If the installation is not correct, it will not only affect the aesthetics. During use It will also cause failures, and the service life will be greatly reduced.
If the four-axis palletizing robot wants the service life of the automatic loading and unloading manipulator of the CNC machine tool to be as long as 10 years, we need to pay attention to the maintenance of the manipulator of the CNC machine tool in daily use. Ten years can save 50,000 yuan a year. In the end, it can save the cost of 500,000 yuan for the enterprise, so let's talk about how to maintain the CNC machine tools and manipulators. People should also pay more attention to the installation of CNC machine tool manipulators. It is necessary to ensure that the installation of each component is in place. Incorrect installation not only affects the appearance, but also causes faults during use, and the service life will also be greatly reduced. .

Correct use of four-axis manipulator:
When people operate the CNC machine tool manipulator, they should follow the relevant requirements. This can effectively prevent the occurrence of misoperation and cause equipment problems. Service life can also be extended.
Correct maintenance of six-axis manipulator:
The maintenance method of the CNC machine tool manipulator should be implemented in place during the use process. Only by doing the maintenance method correctly can the service life be extended. Manipulator maintenance of parts and components is an important part of the CNC machine tool manipulator. The reason why the parts of the CNC machine tool manipulator are severely worn during use is mainly caused by problems with people's installation, so the position of the parts is If there is a problem, the wear will become more serious during use. In order to avoid this situation, people should pay more attention when installing.
Manipulator use lubricating oil:
In order to prevent the parts of the CNC machine tool manipulator from being severely worn during use, it is necessary to add an appropriate amount of lubricating oil after a period of time. The use of lubricating oil can effectively prevent conflicts between parts, and there are Very good anti-rust function can ensure that the parts are used normally and the equipment can be used safely.