Safety measures for welding robots in operation

How to realize the safety precautions of the welding robot workplace? First of all, be sure to ensure the cleanliness of the work area and equipment. If there are oil, water, tools, workpieces, etc. on the ground, it may bring safety hazards to the operators and cause serious accidents.

Secondly, every time the tool is used, it must be returned to the original position outside the welding robot's motion range to avoid collision between the welding robot and the tool left on the fixture, causing accidental damage to the fixture or robot. In addition, after all operations are completed, do not forget to clean the robot and fixtures to ensure their cleanliness.

What safety precautions should be taken in the process of maintaining and inspecting welding robots? It's very simple. As a welding robot worker, he must wear special overalls, safety shoes, and helmets before working to play a full protective role.

Secondly, the personnel responsible for the system integration of welding robots, the design and manufacture of system safety equipment must understand and master the safety guardrail and safety equipment, and it is necessary to read the manual thoroughly to understand the correct operations and measures to be taken in case of emergency.

The other is to strictly abide by the safety rules to avoid unexpected accidents or injuries. The personnel responsible for the maintenance and inspection of the welding robot must check and confirm all circuits related to emergency stop, and make them safely and correctly interlocked in accordance with the corresponding safety standards. . When performing maintenance or inspection operations, make sure that the emergency stop switch can be pressed at any time so that the welding robot can be stopped immediately when needed.