What Is an ARC Welding Robot, Do You Know?

I believe that many people may have never heard of arc welding robots before. Just heard the name, don't think this is a children's toy or a toy like Transformers. In fact, it is a robot used in industry. The main job is automatic arc welding. That is to say, the robot that uses the machine automatic welding machine does not need to use manpower and material resources to carry out welding, which saves labor.

If some people have studied the arc welding robot, they will know that its principle is basically similar to that of the spot welding robot. As early as the mid-1980s, China had already invented the first generation of robots for this purpose. It is formed by 5 parts such as control panel, body and automatic wire feeding device. Under the precise calculation and control of the computer, the continuous passing trace control and point control are carried out. The effect is higher, faster, and more importantly, more accurate than manual operations.

The main operation modes of the arc welding robot are divided into two types, both of which can be used for long-term welding, so that the high efficiency and high quality of the operation can be effectively guaranteed. Compared with other methods, the stability of this mode is also unparalleled. Over the past few years, with the continuous development and development of science and technology, the equipment has also been developing and progressing in a more digital direction. Because of the addition of robots, the work effectiveness of the entire electric welding link process and the process requirements of the product have been improved. Moreover, this technology will also be utilized by more and more industries, gradually forming a manual-free operation.

I bought an arc welding robot, how to operate it? We have not operated before, will there be any security risks at the beginning? Now, let's talk about arc welding robots and safe operation specifications. So that everyone can clearly know how to operate and avoid being hurt.

Before production, we must check whether the equipment is perfect, and then check whether the site where the robot is used is safe. If everything is normal after checking, we can turn on the main switch. After the main power switch is turned on, we need to check whether the current and voltage indicator lights are normal. If the display is normal, we can open the valve of the protective gas cylinder to check whether it is normal. In addition, open the valve of the air source and check whether everything is normal. If you check everything is normal, you can use it.

After use, we must first close the gas valve, then close the gas cylinder, and then close the main switch, shutting down the machine in this order. After shutting down, clean and clean the machine, and then check it again. Make sure that the machine is not damaged during production.