What Are The Safety Measures For Welding Robots In The Workplace

After each tool is used, it must be put back to its original position outside the range of action of the welding robot for storage to avoid collisions between the welding robot and tools left on the jig, causing damage to the jig or robot. In addition, after all the operations are completed, don't forget to clean the robot and fixtures.

As the staff of the welding robot, they must wear specific work clothes, safety shoes and safety helmets before operation to fully protect them.

First of all, please be sure to ensure the cleanliness of the operating area and equipment. If there is oil, water, tools, workpieces, etc. on the ground, it may bring safety hazards to operators and cause serious accidents.

Secondly, for those who are responsible for the integration of the welding robot system, the design and manufacture of system safety equipment, they must understand the safety guardrails and safety equipment, and it is necessary to read through the manual to understand the correct operation and measures to be taken in case of emergency.

In addition, please strictly abide by the safety rules to avoid accidents or injuries. Personnel responsible for maintenance and inspection of welding robots must check and confirm all circuits related to emergency stop, and make them be safely and correctly interconnected in accordance with corresponding safety standards. Lock. When carrying out maintenance or inspection work, make sure that the emergency stop switch can be pressed at any time, so that the operation of the welding robot can be stopped immediately if necessary.