| Category |
Item / Machine Type |
Specification |
| Foundation Requirements |
Small CNC Lathes (SZGH-25, 36J, 36Z) |
Concrete C25, ≥150 mm thick, level ±2 mm/m (~2,500 kg) |
| Mid CNC Lathes (SZGH-46J, 46Z, 56J) |
Concrete C30, ≥200 mm thick, level ±1 mm/m (~3,500 kg) |
| Large CNC Lathes (SZGH-450) |
Concrete C30, ≥300 mm thick, level ±1 mm/m (~6,000 kg) |
| CNC Milling (SZGH-540, 650) |
Concrete C30, ≥250 mm thick, level ±1 mm/m (~3,500 kg) |
| Welding Robots |
Concrete C25, ≥200 mm thick, level ±1 mm/m (~500–1,500 kg base) |
| Palletizing Robots |
Concrete C30, ≥300 mm thick, level ±1 mm/m (~1,000–3,000 kg base) |
| Electrical Requirements |
Voltage |
380V AC, 3-phase + neutral + ground |
| Frequency |
50 Hz / 60 Hz (configurable per order) |
| Power Capacity |
Per machine spec sheet (typically 5.5–22 kW) |
| Grounding |
Independent earth ground, ≤4 Ω resistance |
| Compressed Air |
0.6–0.8 MPa, dry and oil-free |
| Environmental Conditions |
Temperature |
5°C – 40°C operating range |
| Humidity |
≤75% RH, non-condensing |
| Dust / Vibration |
Avoid placing near grinding stations, presses, or heavy traffic |
| Lighting |
≥300 lux at the work area |
| Tools & Personnel On-Site |
Forklift |
Capacity matched to machine weight + 30% |
| Crane / Hoist |
For unboxing heavy machines |
| Personnel |
2–3 trained personnel for unloading and positioning |
| Electrician |
Qualified electrician for power connection |
| Internet |
Required for remote engineer support |
