Spraying Robot Arm

SZGH Spraying & Painting Robot Arm — 6-Axis Industrial Coating Robots

SZGHTECH designs and manufactures a dedicated line of spraying and painting robot arms — the SZGH-P Series — purpose-built for liquid paint spraying, powder coating, and solvent-based finishing on furniture, automotive parts, home appliances, ceramic sanitary ware, plastic shells, and machine tool enclosures. Every SZGH painting robot is a 6-axis articulated industrial robot with a 6 kg wrist payload, IP67 dust-proof and waterproof construction (essential for wet paint booths), and ±0.05 mm repeatability for consistent coating thickness. An explosion-proof (Ex) variant is available for solvent-based paint booths. Combined with an SZGH 3-axis positioner, the robot forms a 9-axis linkage spraying system that paints complex 3D geometries in a single cycle — cutting paint waste by up to 30 % compared with manual spraying while removing human operators from VOC exposure. Free engineering consultation and 24-hour quotation included.

9-Axis Linkage Spraying System — Robot + 3-Axis Positioner

For complex 3D parts — chair frames, chandeliers, engine covers, sanitary ware — a stationary robot cannot reach every surface in a single cycle. SZGH solves this with a 9-axis linkage painting system: an SZGH-P 6-axis painting robot paired with an SZGH 3-axis rotating carriage (positioner).

The nine axes move in real-time linkage, allowing the workpiece to rotate and tilt into optimal painting orientation while the robot maintains a constant tool-to-part distance and angle — the two variables that determine coating uniformity. Result: complete 360° coverage in a single cycle with dramatically reduced paint waste and no operator exposure to overspray.

A typical customer deployment: two nine-axis SZGH spraying robots installed in a single production workshop, replacing 6 manual painters. Beyond improving spraying efficiency, the system completely removes workers from paint fume exposure — a major occupational-health improvement.

Default paired robot: SZGH-LT1500-B-6 (light variant). Custom pairings available with any SZGH-P model.

Compare All SZGH-P Spraying Robots

Positioner Options:

Not sure which model? Send us your part drawing and paint type — SZGH engineers will spec the right robot + positioner within 24 hours.

Choose Your Painting Robot by Industry

How to Choose the Right Spraying / Painting Robot

Choosing the right spraying robot comes down to five decisions:

1. What paint or coating are you spraying?

Water-based liquid paint → standard SZGH-P Series with IP67 is sufficient.
Solvent-based paint (thinner, lacquer, most industrial coatings) → you must use the explosion-proof (Ex) variant to comply with ATEX or equivalent regulations. Standard robots in a solvent booth is a fire-safety violation.
Powder coating → standard SZGH-P with grounding kit and powder-tolerant seals.

2. How large is your largest part?

Measure the diagonal of the largest surface the robot must reach without repositioning. 1,500 mm covers small furniture, appliance covers, kitchenware; 1,950 mm covers medium doors, injection-molded shells, sanitary ware, machine-tool enclosures. For anything larger — automotive body parts, large appliance panels — SZGH offers long-reach custom configurations on the P-series platform up to approximately 2,400 mm. Send us your part drawing for a custom quote.

3. Do you need a positioner (2-axis or 3-axis)?

For flat or 2.5D parts, a stationary robot works fine — no positioner needed. For 3D parts (chairs, chandeliers, sanitary ware, car doors), pair the robot with an SZGH 3-axis positioner to build a 9-axis linkage system that paints every surface in a single cycle without re-fixturing.

4. Ceiling-mount, wall bracket, or floor-mount?

SZGH-P robots mount from any angle — floor, bracket, or ceiling. Ceiling mounting doubles floor space efficiency in booth-constrained facilities. Choose the one that maximizes the workpiece envelope in your booth footprint.

5. How much does an SZGH painting robot cost?

A complete SZGH spraying robot cell — robot + controller + paint atomizer interface + safety fence + booth integration — typically prices USD 18,000 – 45,000 depending on model and options. Adding a 9-axis positioner package adds USD 8,000 – 15,000. Explosion-proof (Ex) variant adds a premium of USD 6,000 – 12,000. Free line-itemized quote within 24 hours.

Rule of thumb for paint savings:

Manual spraying wastes 30–40 % of paint due to inconsistent trigger control and overspray. A properly programmed SZGH robot cuts waste to 10–15 %. On a factory using $200,000/year of paint, that's $30,000–50,000 saved per year — often paying back the robot in under 18 months on paint savings alone.

Why Manufacturers Choose SZGH Spraying Robots

1. Dedicated SZGH-P Series (Not a Repurposed Handling Robot)

Many suppliers rebrand a general 6-axis robot as a "painting robot." SZGH's P Series is engineered from the ground up for spraying — IP67 sealed motors, double-seal wrist for paint mist immunity, hollow-wrist tool cabling to keep paint hoses off the moving arm.

2. 9-Axis Linkage System Under One Supplier

Robot and positioner are both SZGH-manufactured and share the same controller and motion planner. No third-party integration issues, no separate service contracts.

3. Explosion-Proof (Ex) Variant Available

Direct-from-factory Ex variant with sealed motor housings, positive-pressure controller cabinet, and intrinsically safe I/O — for compliance in solvent-based paint booths.

4. Constant Tool-to-Part Motion Planning

The SZGH controller ships with painting-specific motion algorithms that maintain constant distance and angle between the spray gun and the part surface — the two variables that determine coating uniformity. Result: consistent film thickness on complex 3D parts.

5. Multiple Mounting Options

Ground, wall-bracket, or ceiling mount out of the box — critical for retrofitting into existing paint booths where floor space is scarce.

6. Full CE + China Certification, Factory-Direct Pricing

CE certified (EN 60204-1, EN ISO 12100, EN ISO 10218), factory-direct from Shenzhen. Typical price 30–50 % below Japanese/European brands.

Frequently Asked Questions — SZGH Spraying Robot

Q1: What is an SZGH spraying robot?

An SZGH spraying robot is a 6-axis industrial painting robot arm manufactured by Shenzhen Guanhong Technology. The SZGH-P Series is dedicated to liquid paint spraying, powder coating, and solvent-based finishing, with IP67 dust/water-proof construction. Explosion-proof (Ex) variants are available for solvent booths. Common models: SZGH-P1500-B-6 (1,500 mm reach) and SZGH-P1950-B-6 (1,950 mm reach). Long-reach custom configurations up to ~2,400 mm are available on request.

Q2: How much does an SZGH painting robot cost?

A complete cell (robot + controller + atomizer interface + safety fence) typically prices USD 18,000–45,000. A 9-axis positioner package adds USD 8,000–15,000. Explosion-proof variant adds USD 6,000–12,000. Free line-itemized quote in 24 hours.

Q3: Do I need an explosion-proof (Ex) painting robot?

Yes if you spray solvent-based paint, thinner, lacquer, or any coating with flammable VOCs. Standard robots in a solvent booth violate ATEX (Europe), Class I Division 1 (US), or equivalent regulations and are a fire-safety hazard. Water-based paint and dry powder coating do not require Ex-rated robots.

Q4: What is a 9-axis spraying system?

A 9-axis painting system pairs a 6-axis SZGH-P robot with a 3-axis SZGH rotating carriage (positioner). All nine axes move in real-time linkage, allowing the robot to maintain constant distance and angle to the part while the workpiece rotates and tilts into optimal painting position — enabling 360° coverage of complex 3D geometries in a single cycle.

Q5: What paint savings can I expect from a spraying robot?

Manual spraying typically wastes 30–40% of paint due to inconsistent trigger control and overspray. A well-programmed SZGH robot cuts waste to 10–15%. On a factory using $200,000/year of paint, that's $30,000–50,000 in annual paint savings — often paying back the robot within 18 months.

Q6: What materials can SZGH spraying robots paint?

Wood (furniture, cabinets, chairs), metal (kitchenware, machine enclosures, auto parts), plastic (injection-molded shells, toys, 3C covers), ceramics (sanitary ware, tiles), and composites. Any liquid paint, water-based coating, or powder coating that a manual painter can spray, an SZGH robot can spray better and more consistently.

Q7: Can I ceiling-mount an SZGH painting robot?

Yes. All SZGH-P Series robots support ground, wall-bracket, or ceiling mounting — chosen based on the workpiece envelope and booth floor plan. Ceiling mounting is popular for automotive body-part booths where floor space is at a premium.

Q8: Are SZGH spraying robots CE certified?

Yes. All models carry CE certification (EN 60204-1:2018, EN ISO 12100:2010, EN ISO 10218-1/2). The explosion-proof (Ex) variant additionally complies with ATEX Zone-relevant classifications. Certificates and test reports available on request.

Q9: Can SZGH robots handle both painting and powder coating?

Yes, with the appropriate end-effector. The same SZGH-P robot body switches between paint atomizer and powder-coating gun with a tool change. Powder-coating configuration requires proper grounding and powder-tolerant seals, both available as an option package.

Q10: Does SZGH offer painting robot installation and paint-path programming?

Yes. Three service tiers: (1) self-install with video guides and pre-loaded standard paint patterns, (2) remote-guided installation with engineer video call for custom part paths, (3) full on-site installation and paint-path programming by SZGH engineers, including booth integration. On-site service available in 17+ countries.

Ready to Automate Your Paint Booth?

Send us your part drawing, paint type, and current annual paint spend — SZGH engineers will spec the right robot, positioner, and Ex-rating and quote in 24 hours.

[Request Free Quote →]