Installation Made Simple — From Crate to First Cut

Category

Item / Machine Type

Specification

Foundation Requirements

Small CNC Lathes (SZGH-25, 36J, 36Z)

Concrete C25, ≥150 mm thick, level ±2 mm/m (~2,500 kg)

Mid CNC Lathes (SZGH-46J, 46Z, 56J)

Concrete C30, ≥200 mm thick, level ±1 mm/m (~3,500 kg)

Large CNC Lathes (SZGH-450)

Concrete C30, ≥300 mm thick, level ±1 mm/m (~6,000 kg)

CNC Milling (SZGH-540, 650)

Concrete C30, ≥250 mm thick, level ±1 mm/m (~3,500 kg)

Welding Robots

Concrete C25, ≥200 mm thick, level ±1 mm/m (~500–1,500 kg base)

Palletizing Robots

Concrete C30, ≥300 mm thick, level ±1 mm/m (~1,000–3,000 kg base)

Electrical Requirements

Voltage

380V AC, 3-phase + neutral + ground

Frequency

50 Hz / 60 Hz (configurable per order)

Power Capacity

Per machine spec sheet (typically 5.5–22 kW)

Grounding

Independent earth ground, ≤4 Ω resistance

Compressed Air

0.6–0.8 MPa, dry and oil-free

Environmental Conditions

Temperature

5°C – 40°C operating range

Humidity

≤75% RH, non-condensing

Dust / Vibration

Avoid placing near grinding stations, presses, or heavy traffic

Lighting

≥300 lux at the work area

Tools & Personnel On-Site

Forklift

Capacity matched to machine weight + 30%

Crane / Hoist

For unboxing heavy machines

Personnel

2–3 trained personnel for unloading and positioning

Electrician

Qualified electrician for power connection

Internet

Required for remote engineer support