Blog

In 2026, my answer to "which welding robot should we buy?" has genuinely changed. Three years ago, I would have almost always said traditional — a full-size industrial arm behind a safety cage, programmed by a specialist, optimized for volume. That was the right advice for most shops at the time. No

Here is the short answer before we go any further: if your task lives in a horizontal plane and speed matters, choose a SCARA robot. If you need full 3D motion — welding, complex part presentation, spray coating — choose a 6-axis articulated robot. Everything else in this guide helps you apply that

When I visit a new client's factory, I can usually spot the deburring station within thirty seconds. It is the one where two or three operators are hunched over a bench with angle grinders, their faces behind respirators, surrounded by a fine metallic haze. The work looks simple — run a tool along a

Every week I talk to plant managers who say the same thing: "I know robots are the future, but I can't justify the number on paper." In 2026, capital discipline matters more than ever — and I respect that. But when I sit down and work through the actual numbers line by line, the conversation almost

If you are evaluating automation for a flat-plane assembly task in 2026 — inserting components into a PCB, transferring parts between fixtures, or driving screws in a repeating pattern — a SCARA robot is very likely the right answer. I have been helping engineers and plant managers select industrial